Highstar HSD1140 A Instrukcje

Przeglądaj online lub pobierz pdf Instrukcje dla Budzik Highstar HSD1140 A. Highstar HSD1140 A 1 stron. 7 in 1 multifunctional memo board alarm clock with 4 ports usb hub

Drukuj stronę

HSD1140 A/B/C

INSTRUCTIONS

USAGE

• Neon pen writing board

• Can display date, time, or temperature

• 12hr or 24hr time display

• Celsius or fahrenheit temperature display

• 3 set alarms and snooze function

• Birthday message

• Timer and stopwatch function

• Plays 16 classical songs

• Calendar year 2000 to 2099

• 1 to 4 USB ports

PRODUCT DIAGRAM

INSTRUCTIONS FOR USAGE

1 - Battery Installation & External Power Supply

Open battery cover and insert the provided three AAA batteries. If

the batteries are installed correctly, the product should automatically

start, display panel will reset the time and temperature to 25 degrees

celsius, and will produce a 'beep' sound. If not, please reinstall the

batteries.

2 - Display Mode

i) Plug in external power source. The time background display and

writing board will light up. If not plugged in, the background light

will turn oﬀ after 10 seconds.

ii) If no buttons are pressed, the screen will turn oﬀ in 10 seconds and

display panel will automatically change back to time display.

iii) When the time display is on, press the 'up' key continuously to get

the following display modes:

Static Display: Time > Temperature > Year > Month & Day

Scrolling Display: Time > Temperature > Year > Month & Day

3 - Search, Setting Function

i) When displaying the time, press 'M' (for Mode) continuously to get

the following modes:

Time > Temperature > Year > Month & Day > Alarm 1 > Alarm 2 >

Alarm 3 > Birthday Message > Timer > Time

ii) In any display mode, press and hold the 'S' (for Set) button for 3

seconds to go into setting mode. Press 'Up' or 'Down' to change

settings. Press 'S' again to save.

iii) In setting mode, press and hold 'Up' or 'Down' for 3 seconds to

speed up setting process.

iv) In setting mode, press 'M' to save current setting and move on to

the next display mode.

4 - Time Settings

When in time display mode, press and hold 'S' for 3 seconds. 12 hr or

24hr display mode will flash. Press 'S' again to enter time setting

mode - the 'Hour' will start flashing. Press 'S' again and the 'Minutes'

will start flashing. Press 'Up' or 'Down' to set the time.

5 - Temperature Settings

When in temperature display mode, press 'S' to switch between

Celsius or Fahreinheit display.

6 - Calendar Settings

i) When in Year display mode, press and hold 'S' for 3 seconds. 'Year'

will flash. Press 'S' again to enter Day & Month/Month & day display

selection. ("M,D" stands for Month, Day. 'D,M' stands for Day, Month.)

ii) When in Month, Day display mode, press and hold 'S' for 3 seconds

to enter Month settings. Press 'Up' or 'Down' to set the date.

7 - Alarm and Snooze Function

i) In Alarm display, Alarm(1) will flash. Press 'Up' or 'Down' to select

Alarm 1 ring tone. Press 'S' to turn Alarm1 on or oﬀ. If Alarm is oﬀ, the

display will look like --:--, or the alarm time will be displayed. Press

and hold 'S' for 3 seconds to set the alarm.

ii) Alarm's on/oﬀ status will be displayed in the normal time display

mode.

iii) In time display mode, press and hold the 'Down' button for 3

seconds to turn oﬀ or turn on alarms.

iv) In time display mode, press and hold 'Up' button for 3 seconds to

turn oﬀ or on Snooze function for all alarms. If snooze button is on,

there will be a snooze icon on the display.

v) Alarm will ring for 1 minute. If snooze is on, alarm will ring once

every 5 minutes for 3 times.

vi) Press any key to stop alarm.

8 - Birthday Message

i) When birthday message mode is displayed, a candle icon will

flash. Press 'S' to turn the birthday message function on or oﬀ. When

it's oﬀ, the birthday display will look like --:--, or will display the time

of the birthday message.

ii) To set the birthday date and time, press and hold 'S' button for 3

seconds to enter birthday settings. Press 'S' again to enter Month,

Day settings. Press 'S' again to enter Hour, then Day, press 'Up' or

'Down' to set. Press 'S' after selection to return to birthday display

mode.

iii) When in time display mode, the candle icon will be on if birthday

message is enabled. Birthday message will ring for 1 minute. Press

any button to stop.

9 - Timer and Stopwatch

i) When in stopwatch mode, an hourglass icon will flash. Press and

hold 'S' for 3 seconds to enter timer settings. Press 'S' button to set

minutes, seconds, turn on, or pause. Press 'up' or 'Down' button to

change flashing selection. Timer can be set from 0 minutes 1 second

to 99 minutes 59 seconds. When timer reaches 0, ringtone will

sound for a minute. Press any key to stop.

ii) When the stopwatch is paused, press 'Up' or 'Down' for 3 seconds

to reset the stopwatch to 0.

iii) When in time display mode, the hourglass icon will flash if timer

is on.

10 - USB Hub Usage

i) Plug in USB into computer to use. The 4 USB ports can be

plugged in to various kinds of products. This USB hub supports:

Windows 98 / Windows2000 / 2003 / Windows XP / Windows Vista /

Linux / Mac OS X systems.

11 - Message Board Usage

i) Use the neon pen included in the product package. Use the

eraser at the tip of the pen to erase.

CAUTION

1) If the product display is blurry, the colour of the light is fading, or

the ringtone sounds weak, then the batteries need replacing.

2) If any functions are not performing well, detach the batteries or

reconnect the USB cable.

3) If any functions are not working properly after batteries are

replaced, please contact professional repair services.