Cor HA-6400 Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Automatyka domowa Cor HA-6400. Cor HA-6400 10 stron. Setup using the tp-link router

S Select Voice Name(s) at the bottom

S Click Save at the top when finished

S Click OK if a popup message appears to confirm your changes

S Place cover over the main body ("TOP" arrow is opposite of battery side) and snap in place

Repeat step for the next (2) TX−E201 Door Window Sensor

S Select Sensor to Configure for the next available slot i.e. "2 Sensor"

S Click on the Learn button and repeat steps as above

Step 8 — Learn the 60−807−95R Motion Sensor to the Côr Panel

S Select Sensor to Configure for the next available slot i.e. "4 Sensor"

S Click on the Learn button

S Remove the back cover from the Motion Sensor

S A message will appear that a New Device Found

S Enter a description under Sensor Name

S Select the appropriate Sensor Type i.e. "5 Follower"

S Select "1 Bypass" for Sensor Option

S "Tamper" should be defaulted as checked

S Select Voice Name(s) at the bottom

S Click Save at the top when finished

S Click OK if a popup message appears to confirm your changes

Step 9 — Learn the 60−744−95R Water Sensor to the Côr Panel

S Select Sensor to Configure for the next available slot i.e. "5 Sensor"

S Click on the Learn button

S Remove the top cover from the Water Sensor main body and press the program button on top of the sensor main body

S A message will appear that a New Device Found

S Enter a description under Sensor Name

S Select the appropriate Sensor Type i.e. "2 24 Hour Audible"

S Select "12 Water Leakage" for Sensor Option

S "Tamper" should be defaulted as checked and check "Disable Internal Reed"

S Select Voice Name(s) at the bottom

S Click Save at the top when finished

S Click OK if a popup message appears to confirm your changes

Confirm Water Sensor is properly sync'd with the Côr Panel

S Short the contacts on the small Water Sensor unit with a metallic pin

S The Côr panel will alarm or chirp

S Acknowledge the alarm by entering 1 2 3 4 > Enter to silence the panel

S Repeat two more times

Step 9a — Learn the TX−E611 Water/Freeze Sensor to the Côr Panel as a Water Sensor (if included in

Starter Kit)

S Select Sensor to Configure for the next available slot i.e. "5 Sensor"