highwood Bespoke Deep Seating Instrukcja montażu - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz highwood Bespoke Deep Seating. highwood Bespoke Deep Seating 8 stron.

Drukuj stronę
highwood Bespoke Deep Seating Instrukcja montażu
Connecting Two Seats
2) To create a sectional or
couch, connect each seat base
together using (1) M1 bracket
and (2) B screws as shown.
The bracket should overlap
both seat bases. Locate the
M1 bracket at the midpoint of
the seat base.
Drilling 1/8" pilot holes first will
assist in driving the screws. To
do so, hold the bracket in place
and mark each screw location
on the seat base. Remove the
bracket and drill a 1" deep hole
at each location.
3) Align each Back as shown. Locate
the hole drilled mid-way up each back
upright. Insert a D bolt into one side
and a F cap nut into the other side and
tighten.
BACK UPRIGHT
For information on Care and Cleaning or to Register your
highwood product, please visit www.highwood-usa.com.
B
M1
F

DETAIL VIEW

D
AD-DS-KIT
08.25.2021
Page 6 of 8