highwood Sequoia Professional Weldon CM-BENSQ61 Instrukcja montażu

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Meble zewnętrzne highwood Sequoia Professional Weldon CM-BENSQ61. highwood Sequoia Professional Weldon CM-BENSQ61 2 stron. Picnic bench 6ft

Drukuj stronę
Sequoia Professional
Weldon Picnic Bench 6ft
Assembly Guide
IMPORTANT!
DO NOT fully tighten the bolts until all bolts are started.
Once all bolts are inserted, go back & tighten all the bolts.
HARDWARE INCLUDED
A
1/4"-20 X 1-1/2"
CENTER LEG ASSEMBLY
A
OUTER LEG ASSEMBLY
DOWN
BRACE
A
OUTER LEG ASSEMBLY
SEQUOIA
PROFESSIONAL
by
Qty: 14
SEAT ASSEMBLY
A
CENTER LEG ASSEMBLY
SEAT ASSEMBLY
For information on Care and Cleaning or to Register your
SEQUOIA PROFESSIONAL product by highwood , please visit
www.highwood-usa.com.
TOOLS INCLUDED
5/32" HEX KEY
1) Begin with placing the Seat Assembly
face down.
2) Attach the Outer Leg Assembly and the
Center Leg Assembly to the Seat Assembly
using (4) "A" bolts.
3) Slide the Brace in between the Outer
Leg Assembly and the Center Leg
Assembly.
4) Attach the Brace to the Outer Leg
Assembly and the Center Leg Assembly
using (4) "A" bolts.
CM-BENSQ61
08.31.2021
PAGE 1 OF 2