highwood Brockton Instrukcja montażu - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Oświetlenie zewnętrzne highwood Brockton. highwood Brockton 2 stron.

STEP 2

Set ground stake tabs into place

Use a ﬂat head screwdriver

and/or a set of pliers to

bend the locking tabs on

Metal ground stake (B) into

appropriately a 45 degree angle

as shown in Figure 3.

STEP 3

Attach mailbox to ground stake

With the ground stake in place and the locking tabs set into

position slide your highwood

as shown in Figure 4 below.

Note: Make sure to slide the post straight down so the locking

tabs touch the inside wall and properly engage in the corners of

the highwood

post as shown in Figure 5 below.

Fig. #4

For information on Care and Cleaning your highwood

Visit our Website and Facebook page to see more highwood

45˚

Fig. #3

Lamppost (A) over the stake

Fig. #5

www.highwood-usa.com • www.facebook.com/highwoodUSA

STEP 4

Final adjustment

Final adjustment may require you to

twist the post and ground stake so

the Lamppost (A) is positioned in

the correct direction. This rotation

adjustment will not disrupt the

ground attachment of the stake.

STEP 5

Attach Lamp

You can now attach any lamp to the top of your new lamppost

using universal brackets or by following the instructions/brackets

supplied with the lamp itself.

product visit www.highwood-usa.com/care.html

Fig. #6

products!