Agrox RTU5015 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler Agrox RTU5015. Agrox RTU5015 12 stron. Gsm gate opener remote switch

in it, we also use a Password that makes it impossible for anybody, who doesn't know it, to

access the system by chance.

4. The relay output will change the close or open status by every call in, please note it. Means the

first time call it, it will close the relay to switch on the lock, if the second call in is in the setting

time, then the unit will ignore the setting time, and open the relay, to switch off the lock or

machine.

5. The functions of the two inputs are the same. The two digital inputs will be in armed mode after

10minutes from the last call-in.

6. Remember that commands must be CAPITAL LETTERS. It is PWD not pwd, CAP not Cap etc.

Don't add spaces or any other character.

7. The pwd in the commands is means the password, when you use it, please in stand of it by the

digital number; the capital letters PWD is the command letter, use PWD directly.

8. If you use this model for gate open, you only need to change the password and setup the

authorized numbers.

9. In some GSM operators they use different SMS parameter; the units can't return the SMS

confirmation is normally. It is not product problem. Also, you can try to add the country code

before the number, see the below settings:

For example:

In China, the country code is 0086, or +86.

The user cell phone number is 13570810254 and has been assigned as a SMS Alert number, the simcard

number in the panel is 13512345678.

Problem 1: Alarm but the user hasn't received the SMS Alert.

Solution: Please plus the country code while you setup the 13570810254 as SMS Alert number, means setup

008613570810254 to instead of the 13570810254.

Problem 2: The user number can receive the SMS Alert message from alarm panel, but the alarm panel can

not receive the commands from the user number.

Solution: Please add country code to the simcard number in the alarm panel. Means send sms commands to

008613512345678 to instead of 13512345678.

Solution 3: When you use cell phone dial another one, what number it will be displayed then you can set the

displayed number as dial numbers; when you use cell phone send SMS to another cell phone, what number it

will be displayed then you can set the displayed number as SMS Alert number, just use the 00 to replace the

"+", also, you can try the "+".

10. Please write down the Authorized number list in a paper for review in further.

11. If you want to reset the RTU5015 to factory default, then please send RESET to it within 3

minutes after switch on the RTU5015. (The GSM Led in RED status, if the GSM LED change to

GREEN, then the RTU5015 can not respond this command.)

12. If the command is incorrect, the RTU5015 will return: Command error, please re send

command. So please check the Command, or add the country code before the telephone

Page 6 of 6 Ver 1.3

File No.:RTU501513