AFL DFS1 Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przyrządy pomiarowe AFL DFS1. AFL DFS1 8 stron.

DFS1 FiberScope Quick Reference Guide

The DFS1 is a hand-held electronic imaging device used to inspect fiber optic connector

end-faces for damage or contamination. It is connected to an M-Series (M200, M700)

OTDR or C-Series OTDR or Certification Tester (C840, C850) via a USB port. The DFS1

obtains power from the attached device and delivers video images to the attached device

for display and archiving.

Adapter tips are used with the DFS1 Digital FiberScope to inspect ferrule ends of jumper

cables, as well as fiber ends mounted inside bulkhead adapters on the front panels of

transmission equipment and in patch panels.

An extensive range of tips is available. Please refer to the Adapter Tips Selection Guide

available at www.AFLglobal.com -> NOYES Test and Inspection -> DFS1 -> Downloads.

DFS1 Controls and Interfaces

Interchangeable

Probe Adapter Tips

USB Connector

Focus Adjust Knob

Probe Dust Cover

Adapter Tip Locknut

Probe Adapter Base

Display Capture Button