Galvin Engineering 656512 Instrukcje instalacji

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Produkt hydrauliczny Galvin Engineering 656512. Galvin Engineering 656512 5 stron. Ss vandal resistant d/f plate assembly for pneumatic inwall cistern w/ cp bs raised buttons

Drukuj stronę

Product Installation Guidelines

SS Vandal Resistant D/F Plate Assembly

for Pneumatic Inwall Cistern w/ CP BS

Raised Buttons

PRODUCT CODES

656512

SPECIFICATIONS

−

Face plate assembly features pneumatic dual flush push activation buttons for CIST19-PNEU-2 Slim-

Line Inwall Cistern.

−

2mm thick, Vandal resistant stainless steel faceplate.

TECHNICAL DATA

Activation

Connections

Hose Length

Finish

NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without

notice.

MOUNTING DETAILS

If a cut out is required, refer to the face plate position and cut out details below.

The push button can be positioned as preferred but consideration should be given to ensure it is easily

accessible for children and adults.

A 70mm x 140mm x 80mm cut out is required in the wall to fit the two push buttons. Drill two holes 160

mm from centres as shown for two nylon wall plugs 8 X 40 (NWP8).

Push Button

Pneumatic

3 metres

Polished

Version 1, 6

July 2022, Page 1 of 5