Galvin Engineering Ezy-Drink Lead Safe 170.81.13.01 Instrukcje instalacji
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Produkt hydrauliczny Galvin Engineering Ezy-Drink Lead Safe 170.81.13.01. Galvin Engineering Ezy-Drink Lead Safe 170.81.13.01 4 stron. Remote push button drinking tap
Drukuj stronę
Lead Safe™ Remote Push
®
Ezy-Drink
Button Drinking Tap
PRODUCT CODES:
- 170.81.13.01
SPECIFICATIONS
Drinking taps are designed to operate at full mains pressure.
The rubber mouthguard is resistant to fungal and bacterial attack and has a high resistance to sunlight.
Adjustable built-in flow restrictor.
Made from Lead Safe
IMPORTANT: All Ezy-Drink
our premises in good working order.
As 'lead free' is not currently defined by low in Australia and New Zealand, we have based our definition of Lead Safe™ on the requirements of s1417 of the USA's Safe Drinking Water Act
(SDWA) and the relevant US standards NSF61 / NSF372. The SDWA defines 'lead free' as "not more than a weighted average of 0.25% lead when used with respect to the wetted surface of
pipes, pipe fittings, plumbing fittings and fixtures".
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without
notice.
TOOLS REQUIRED
Power drill
Spanner or adjustable crescent
Screw driver
™
DR brass
®
remote bubbler taps are tested in accordance with AS/NZS 3718 and leave
th
Version 1, 12
March 2020 Page 1 of 4
½" BSP - Female
Rubber mouthguard
Push Button
Min
50
Max
500
Min
5
Max
60
1.7
Chrome