Galvin Engineering Ezy-Push CP-BS Lead Safe Instalacja produktu
Przeglądaj online lub pobierz pdf Instalacja produktu dla Produkt hydrauliczny Galvin Engineering Ezy-Push CP-BS Lead Safe. Galvin Engineering Ezy-Push CP-BS Lead Safe 4 stron. Timeflow push button replacement cartridge – adjustable
Drukuj stronę
Product Installation Guidelines
CP-BS Lead Safe™ Timeflow Push Button
®
Ezy-Push
Replacement Cartridge – Adjustable
(Suit 173.61.55.00 and TP08045PA)
PRODUCT CODES:
- 173.92.55.00
SPECIFICATIONS
−
The Ezy-Push
−
Smooth round designs to facilitate easy clean and help reduce dirt and bacteria growth.
−
Water saving, easy to operate and low maintenance.
−
Adjustable time flow.
IMPORTANT: All Ezy-Push
premises in good working order.
Note: Run
time is based on 500kPa, 5 litres per minute @ 22 degrees Celsius. Time will vary plus or minus
30% based on water temperatures, pressures, flow rates and water quality.
As 'lead free' is not currently defined by low in Australia and New Zealand, we have based our definition of Lead Safe™ on the requirements of s1417 of the USA's Safe Drinking Water Act
(SDWA) and the relevant US standards NSF61 / NSF372. The SDWA defines 'lead free' as "not more than a weighted average of 0.25% lead when used with respect to the wetted surface of
pipes, pipe fittings, plumbing fittings and fixtures".
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Construction
Finish
Time (s)
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice.
© Galvin Engineering Pty Ltd
®
time flow cartridge has a unique self-closing operation.
®
Push Button taps are tested in accordance with AS/NZS 3718 and leave our
Version 1.1, 13 May 2021, Page 1 of 4
M26 x 19 TPI - Male
N/A
Time Flow Cartridge
Min
100
Max
500
Min
5
Max
65
N/A
Brass
Chrome
0 – 30 Adjustable