Dynex DX-DRTVM114 Instrukcja montażu - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Uchwyt TV Dynex DX-DRTVM114. Dynex DX-DRTVM114 15 stron. Support mural discret pour téléviseurs
Również dla Dynex DX-DRTVM114: (Angielski) Instrukcja montażu (15 strony), (Francuski) Podręcznik montażu (15 strony)
Drukuj stronę8
STEP 3 - Option 2: Attaching the mounting hardware to TVs
with irregular or obstructed backs
Note: If you plan to use a 5° tilt with a larger TV (42"+), we suggest using spacers with the mounting
brackets so that the bottom of the TV does not touch the wall.
1
Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that
the brackets are level.
2
Place spacers (I or R) behind the TV brackets. If you are using M4/M5 washers (G), place them between
the spacers and TV brackets and over the holes in the TV brackets. If you are using M6/M8 washers (H),
place them over the holes in the TV brackets. Insert screws (F, K, N, P, or Q) through the washers, TV
brackets, and spacers.
3
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You'll need
Screws
or
F (4)
P (4)
Level
I
R
or
or
K (4)
or
Q (4)
Phillips screwdriver
or
or
K N
P
or
Washers
or
N (4)
G (8)
Spacers
or
I (4)
Q
H (4)
B and C TV
R (4)
brackets