Dynex DX-TVM111 Instrukcja montażu - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Uchwyt TV Dynex DX-TVM111. Dynex DX-TVM111 13 stron. Quick setup guide (french)
Również dla Dynex DX-TVM111: Podręcznik szybkiej konfiguracji (2 strony), (Angielski) Skrócona instrukcja konfiguracji (2 strony), (Francuski) Przewodnik szybkiej instalacji (2 strony)

Installation instructions

STEP 3 - Determine whether your TV has a flat, irregular, or obstructed back

1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages

and scratches.

2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV

for instructions.

3 Temporarily lay the TV bracket (A) on the back of your TV.

4 Align the screw holes in the TV bracket with the mounting screw holes on your TV.

5 Identify which type of back your TV may have:

• Flat back: The bracket lays flush against the back of your TV and do not block any jacks. You do not need spacers when

assembling the wall mount.

• Obstructed back: The bracket blocks one or more of the jacks on the back of your TV. You will need spacers when

assembling the wall mount.

• Irregularly-shaped back: There is a gap between the bracket and some part of the back of your TV. You will need

spacers when assembling the wall mount.

6 Remove the TV bracket (A).

DX-TVM111