Galvin Engineering CliniLever TCWTC80CC Instrukcja instalacji produktu - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji produktu dla Armatura łazienkowa Galvin Engineering CliniLever TCWTC80CC. Galvin Engineering CliniLever TCWTC80CC 4 stron. Cp-bs hospital wall top assembly

Drukuj stronę

Product Installation Guidelines

3. Fit handle

−

Ensure the spindle is in the closed position and

firmly press the lever handle onto the spindle in

the desired orientation.

−

Check lever handles for correct operation. It

should turn freely for a full ¼ turn.

−

Secure the handle in position using the

supplied washer and stainless steel cap screw.

TROUBLESHOOTING

PROBLEM

Taps are dripping water

Water is leaking from spindle

Water is not flowing from tap

Spindle is difficult to turn

(jumper valve)

Handle is loose

4. Fit water temperature indicator & testing

CAUSE

Jumper valves are worn or damaged

Tap seat is damaged

O-ring on jumper valve spindle is

damaged or worn

Water is turned off

Aerator or flow regulator is blocked by

debris

Build up of scale on spindle, spindle

worn or o-ring has been damaged

Screw has come loose

−

Once lever handle is secure; fit the appropriate

water temperature indicator.

−

Once temperature indicator is fitted, check the

operation of the unit and inspect for any leaks.

RECTIFICATION

Replace jumper valve

Refurbish tap seat using a reseating

tool.

Replace o-ring

Turn on water

Remove aerator and/or flow

regulator from tap and remove

debris. Install an inline strainer.

Remove jumper valve, clean and

regrease. Replace o-ring. Complete

SBA may need to be replaced.

Tighten handle screw

Document No.: 001.00.10.18

Version 1, 4 November 2022, Page 3 of 4