Galvin Specialised 170.93.43.00 Instrukcja instalacji produktu - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji produktu dla Produkt hydrauliczny Galvin Specialised 170.93.43.00. Galvin Specialised 170.93.43.00 4 stron. Remote push button top assembly
Drukuj stronę
v
3. Secure Inlet Body
−
Tighten the screws on the inlet body as shown. Do not overtighten.
−
Once fitted, check installation for leaks and correct operation.
TROUBLESHOOTING
PROBLEM
Inconsistent flow
Water is not flowing from tap
Continuous flow
Button hard to press
Not Supplied
CAUSE
Blocked top assembly
Water is turned off
Top assembly loose or
internally obstructed or
damaged
The mains pressure may be
too great
th
Version 1, 27
October 2020 Page 3 of 4
RECTIFICATION
Remove top assembly and clean
Turn on water
Remove top assembly, clean with water
and re-grease spindle if required
Reduce to below 500kPa (70PSI). Re-
grease spindle if required