Hikari H93S Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyna do szycia Hikari H93S. Hikari H93S 20 stron. Electrical control box
Drukuj stronę
3.Lower thread detect mode：
Under the normal sewing mode，press"
key shows"JJ&DX"and"JP" interface， parameter on the screen shows current data， press
exchang interface，press
mode。
Remark：1、The quantity lower thread back to zero，long press
monitoring state。
2、Lower thread function is available should setting the parameter no. P30
3、Lower thread error：LBOB
4. Aging mode：
Under the normal sewing mode, press"
press"
+
"key for operating，press again for stopping。Long press
return back to normal mode from current state。
P94 parameter manual：
0：Time mode：Operate time P98，stop time P97。
1：Stitching mode：Stitching operate P98，stop time P97。
2：Easy mode：No need stop sewing，the other settle is same as 0。
3：Aging mode：Running 1S，stop 0.1S，speed 5000rpm。The other is same as easy mode。Total running
time15 minutes。
Remark：The parameter data is setting 3 for aging mode of control box，damage head under this
mode，no use this mode, our suggestion is change to mode 0。
94
Auto test mode
96
Auto test max speed
97
Auto test stop time
98
Auto test stitch setting
5.Setting mode：
Under the normal sewing mode, long press
could return back to normal mode from current mode。
5.1 Motor sensor angle setting test mode：
Under normal sewing mode, long press
enter motor angle test interface，appear "dj"， toward forward pedal one time（or press
key could change the current quantity，press"
0：Time mode（unit：S）
1：Stitching mode
2：Easy mode
3：Setting mode
Setting auto test max speed
Setting auto test stop time
Auto test stitch setting
1-DJ
Motor angle test
2-bJ
Step zero setting
3-PD
Pedal zero test
4-JD
Trimming operate test
5-CP-1/2
Main shaft encode signal test, solenoid signal test
+
setting"，enter "DX" accounting state。 Press
"assemble key ， enter aging mode ，
+
key 3 second， enter setting mode， press
key 3 seconds，screen appear "1-dJ"，press
4
"key enter sewing
key 3 secong under the system
key over 1 second could
0~10
200~5000(rpm)
1~250(ms)
1~250(ms)
key
3
3500
20
30
key
key
） ，motor