AGS Mini Merlin CH4CO Instrukcja instalacji i obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Przyrządy pomiarowe AGS Mini Merlin CH4CO. AGS Mini Merlin CH4CO 16 stron. Dual gas detector, methane & carbon monoxide gas
Również dla AGS Mini Merlin CH4CO: Podręcznik użytkownika (16 strony)

Drukuj stronę

1. Wiring the Device

Installation & Operation Manual

Fixing

Unpack all the parts!

This device is designed for surface mounting using 2 mounting screws (not supplied) and must

be installed by a licensed, insured contractor.

Carefully remove the rear cover from the unit.

Using the rear cover - mark the screw holes to the wall.

Ensure the wall surface is flat to prevent base distortion.

There are two pre-fractured areas for cable entry and a divider to separate low and

high voltage connections.

Placing at eye level allows for optimum monitoring of the digital display screen, or as

guide, 5 feet (1.5 meters) from ground level.

After executing the mounting and connections – secure the rear cover.

Be careful when creating access for cables – Damage to boards will void any warranty.

Do not attempt to remove the Circuit Board! This will void any warranty.

Rev: 12 01-20

AGS Mini Merlin CH4CO