Adesso NuScan 1000 Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Czytnik kodów kreskowych Adesso NuScan 1000. Adesso NuScan 1000 1 stron. Film scanner

Drukuj stronę

EZScan 1000 Film Scanner

Model: EZScan 1000

Scanner User Interface

Transparency Scan Button

Dust Cover Slot

LED Indicator

Negative Scan Button

1. LED Indicator: Indicates the scanner status.

On: The scanner is connected with the computer and ready for

film scanning.

Off: The scanner is off, either because scanner is disconnected

from computer or because the computer is turned off.

2. Transparency or Negative Scan Button: A simple touch on the

scanner Transparency or Negative Scan Buttons enables you to

conveniently scan the slide or filmstrip on holder, and automatically

save the digital image file on your computer.

3. Dust Cover Slot: Insert the film holder into the scanner through dust

cover slot. The film holder can be inserted from either side. The film

holder will index at each frame using the notches on its side rails.

Attention

Before scanning read instructions below for best results.

• Always turn the film emulsion (non-glossy) side facing towards the front

of scanner and glossy side facing the back of the scanner (where USB

cord is located).

• On slide/filmstrip holder edge you can see 'Mounted Slide Holder' or

'Filmstrip Holder' text, always keep this side facing towards the back of the

scanner (where USB cord located).

• On slide/filmstrip holder edge there is a small label with slide/filmstrip

holder inserting instructions, this label should always face towards

front of scanner.

Label

Attention

Before performing the driver/software installation ensure your

scanner is NOT CONNECTED to your computer.

1. Insert the Software CD into your CD-ROM drive.

Note: If the Installation Wizard does not start or display automatically,

please double click "install.exe" from the root of CD-ROM.

2. When the Installation Wizard window is displayed click on "Install

the Software" button.

3. Next, click on the "Install" button to start the installation.

4. Then click on the "Next" button in the window that appears.

5. If there is a message asking you to install device software, click the

"Install" button.

Insert Film Holder into Scanner

Insert the film holder into the scanner through dust cover slots. The film

holder can be inserted from either side. The film holder will index at each

frame using the notches on its side rails.

Attention

1. To ensure film is scanned properly, verify that your slide/film holder is

inserted correctly (see page 9).

2. The film holder should be inserted into the scanner smoothly. Do not push

the film holder hard or use extreme force, this will damage scanner.

3. When film holder is inserted into scanner it will stop at index positions,

before preforming scan gently push and pull the film holder to make sure

the film holder has correctly landed in an index position.

With the Adesso Film Scanner quickly and easily convert old filmstrips and slides to

digital images for instant sharing or digital storage. This film scanner conveniently

connects to your computer via USB connection and is USB bus powered, meaning no

additional power supply cable is needed, the same USB connection to your computer

powers the digital film scanner. The Adesso Film Scanner is extremely user-friendly,

just press the one-touch button and film photographs are instantly scanned and on

your computer screen in high quality 1800 DPI images. The Adesso Film Scanner is

also lightweight and portable so you can use anywhere. Sharing your film photo-

graphs digitally is only a click away, start enjoying with family and friends today!

SPECIFICATIONS

Scanning Type: Image Capture CMOS

Optical Resolution: 1800 DPI

Software Interpolation: 3600 DPI x 3600 DPI (5-Megapixels)

Color Depth: 24 bit/pixel

Preview/ Scan Speed: Approx 8 sec (600 DPI)

Action Button: Transparent & Negative Scan

Scan Method: Single Pass

Protocols: TWAIN Compliant

Interface: USB 2.0 Only

Processor: PC: IBM Compatible PC with Pentium III or higher

Mac: PPC G4, PPC G5 Intel

Memory:

512 MB RAM and 500 MB Free HDD Space

Operating System: Windows

7, Windows

Vista, Windows

Mac

10.4, 10.5 & 10.6

Connectivity Interface: USB 2.0 Port

Others: High Color Graphic Card (VGA or higher)

CD-ROM Drive (for Software Installation)

6. Click "Install this driver and software anyway" (Windows 7 or Vista) or

"Continue Anyway" (Windows XP or 2000) when Windows

displayed during the installation process.

7. Next a window will be displayed asking you to connect scanner. Plug the

smaller end of the included mini USB cable to the back of the scanner and

plug the bigger end of the USB cable to the USB port on your computer.

8. When your computer recognizes scanner, return to the orignal window

that asked you to connect scanner and click "OK".

9. Click "Finish" to complete the driver installation.

10. Restart your computer after the installation is completed.

Converting Film to Digital Files

1. Press either Transparency or Negative scan button on the EZScan

1000 and the FotoLite screen will be displayed as seen below.

Note: FotoLite software must be active and showing in Windows

buttons will launch scanning software (to open software please see

page 11).

scan

preview

2. Click "Preview" icon to see image on screen, then once selection area

is set click "Scan" icon. The scanned image(s) will be saved in the

"Destination Folder" selected under "Preference Settings" of FotoLite.

CONTENTS

(1) Adesso EZScan 1000

(1) Filmstrip Holder

Film Scanner

XP & Windows

2000

Mini USB Cable

Quick Start Guide

Using Mounted Slide Holder

message is

To scan 35mm mounted slides (max 4 slides):

Insert mounted slides into slots with emulsion (non-glossy) side down.

There are arrows and illustrations on the frame of each slot. Please

follow illustrations to insert mounted slides.

Using Filmstrip Holder

To scan 35mm filmstrips (max 6 frames):

Open filmstrip holder and place filmstrip in the film holder with emulsion,

(non-glossy) side down. Then snap the film holder cover closed.

FotoLite Setting (Optional)

1. Double click on the FotoLite icon located on the Windows system tray

or right click the FotoLite icon

tray so

Note: If the FotoLite icon is not in your Windows system tray, go to your

computer's START menu, then Programs, find EZScan 1000

folder and select FotoLite software.

2. The FotoLite Setting window

will appear. You can apply

customized settings of your

choice or leave default.

3. Click "Done" when complete

or "Default" to return settings

to original default settings.

(1) Slide Holder

Software CD

and select "Properties".