Dynojet Power Vision Skrócona instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Akcesoria motocyklowe Dynojet Power Vision. Dynojet Power Vision 17 stron. For 2019-2022 can-am ryker 600/900
Również dla Dynojet Power Vision: Instrukcja instalacji (6 strony), Instrukcja instalacji (8 strony), Instrukcja instalacji (7 strony), Podręcznik (7 strony), Instrukcja instalacji (7 strony), Instrukcja instalacji (7 strony), Instrukcja instalacji (7 strony)

Custom Tunes may or may not be pre-loaded from a reseller that specializes in

custom tuning. Dynojet does NOT load custom tunes in the Power Vision when it

leaves our facility (we load Dynojet Pre-Configured Tunes). You may also receive

Custom Tunes via email that can be uploaded to the Power Vision using WinPV, our

custom tuning software.

Use the following steps to flash a Custom Tune file to the ECM:

• Select Program Vehicle.

• Select a Custom Tune File to

flash.

• Touch Select.

Note: You can edit any tune that's loaded in the Tune Manager

prior to flashing your ECM. The Power Vision allows you to make

basic adjustments to your tunes directly on the device without

using a computer. In order to gain full access to your tune files,

you'll need to download them from the Power Vision to WinPV,

our custom tuning software.

98100014.07

FLASHING A CUSTOM TUNE FILE

• Select Load Tune.

• Verify the tune information. If

the tune information is correct,

touch Continue.

Toll Free: 1-800-992-4993

• Select Custom Tunes.

The Tune is now ready.

• Select Flash to flash this tune to

the ECM.

Note: During the flash process,

do not turn off the bike. Once

complete,

you will be

prompted to

turn the bike

off for 10

seconds.

• Select Edit to edit this tune.

• Select Exit to exit the screen

without any changes.