AGS Merlin GDP2 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Panel sterowania AGS Merlin GDP2. AGS Merlin GDP2 12 stron. Safe area gas detector controller
Również dla AGS Merlin GDP2: Instrukcja obsługi i instalacji (7 strony), Instalacja, obsługa i konserwacja (12 strony)

Drukuj stronę

Merlin GDP2

General Information

The Merlin GDP2 is a two-zone gas detection panel which can be used in many applications,

e.g. factories, car parks, shopping centres and the most common being a boiler house

application.

Many varieties of detectors are compatible with GDP2, e.g. Natural Gas, Carbon Monoxide,

LPG and Oxygen depletion. These detectors can be used in any combination. Also multiple

thermal links can be used, when wired in series. The GDP2 can be integrated with a BMS, fire

alarm and remote emergency shut-off buttons.

The information contained within this guide should be referenced for typical installation and

operation only. For site specific requirements that may deviate from the information in this

guide – contact your supplier.

1.1

Panel Mounting

The control panel is designed for surface mounting using 4 mounting screws. Removing the

cover on the panel gives access to the circuit board, this should be removed before drilling

entry holes into the case.

It is recommended that this device be commissioned upon installation and serviced annually.

Do not apply lighter gas or other aerosols to gas detectors – this will cause extreme damage.

This device requires a continual supply of electrical power – it will not work without power.

This device should not be used to substitute proper installation, use and/or maintenance of fuel burning

appliances including appropriate ventilation and exhaust systems.

Your product should reach you in perfect condition, if you suspect it is damaged, contact your supplier.

Information on waste disposal for consumers of electrical & electronic equipment. (EEE)

When this product has reached the end of its life it must be treated as Waste Electrical & Electronics Equipment

(WEEE). Any WEEE marked products must not be mixed with general household waste, but kept separate for

Please contact your supplier or local authority for details of recycling schemes in your area.

Rev: 05 05-19

Important Warning Statements

Never ignore your device when in alarm.

the treatment, recovery and recycling of the materials used.

User Guide