Dynojet POWER VISION 3 Instrukcja instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Dynojet POWER VISION 3. Dynojet POWER VISION 3 8 stron. 2020-2021 honda rubicon/foreman/trx520
Również dla Dynojet POWER VISION 3: Instrukcja instalacji (9 strony), Instrukcja instalacji (7 strony), Instrukcja instalacji (8 strony)
Drukuj stronę
INSTALLING THE POWER VISION CONTINUED
ROUTING
THE CABLE
2
Route the Power Vision cable away from any moving or
hot parts. Dynojet recommends using zip ties to secure
the cable to existing non-moving components.
3
Secure the Power Vision to the vehicle using the supplied
Velcro or mounting hardware. Make sure the Power Vision
will not interfere with the operation of the vehicle.
Visit
www.dynojet.com
for an array of mounting solutions
for your Power Vision.
Note: The Power Vision does not need to be mounted
to the vehicle, however, the Power Vision provides
a window into your vehicle. Mount the Power Vision
to your handlebars and gain access to customizable
full-color gauge screens, along with data
logging
and
troubleshooting
screens.
DIAGNOSTIC PORT LOCATION
2012-2017 Dyna Models
2014-2020 Touring Models
2015-2021 Street Models
Diagnostic
connector is located
behind the Left hand
side cover. Connector is
Light Grey
in color with black
rubber
plug installed.
Diagnostic
connector
is
located behind the
left
hand
side
cover. Connector
is Light
Grey
in color with a
black
rubber plug
installed.
Diagnostic connector is located
behind right
hand
side cover. Connector is Light
Grey
in
color
with black
rubber
plug
installed.
2014-2021 Sportster Models
(including XR
Models)
Diagnostic connector is located behind
the
Left hand
side cover. Connector is Light Grey in color with black
rubber plug installed.
2011-2011
softail
Models
Diagnostic connector is located under the seat,
attached to
the
frame by the rear fender. Connector is
Light Grey
in color, with black rubber
plug
installed.
3