AFL FOCIS Flex Skrócona instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Instrumenty analityczne AFL FOCIS Flex. AFL FOCIS Flex 16 stron. Fiber optic connector inspection system
Drukuj stronęConfiguring Auto-Save and Auto-Send
1
1
From the Main Menu, select Settings > Capture > Auto Focus
Use
to enable or disable the auto-focus option
•
2
Highlight and Select Auto-Send. Use
2
Capture key, or enable on 2nd Capture key.
3
Highlight and Select Auto-Save. Use
3
Capture key, or enable on 2nd Capture key.
4
Highlight and select Save to Folder/File. Use
4
folder/file field.
When Auto-Send/Save is enabled, press Capture from Live Image mode to auto-
focus (if enabled), capture
image, analyze pass/fail
(if enabled), then send
image and pass/fail results
to paired device and save
image and pass/fail results
to configured Job/Cable
folder.
Note: If Auto-Save or
Auto-Send on 2nd Capture
key is enabled, you will
be prompted to press the
Capture key again to save
or send. Press the Back key
if you do not wish to save
or send image.
1
to disable auto-send, enable on 1st
to disable auto-send, enable on 1st
to select and edit the desired
2
3
4
12
/
as needed.