AGS Merlin 1000S Instrukcja instalacji i obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Sprzęt laboratoryjny AGS Merlin 1000S. AGS Merlin 1000S 12 stron. Gas utility isolation controller
Również dla AGS Merlin 1000S: Instrukcja obsługi i instalacji (10 strony), Instrukcja instalacji, obsługi i konserwacji (10 strony), Instrukcja instalacji i obsługi (16 strony)

Drukuj stronę
AGS Merlin 1000S Instrukcja instalacji i obsługi
Installation & Operation Manual
Timeout
Under normal working conditions this LED is off.
This LED will illuminate AMBER when auto-shut down has occurred.
OFF = OK
ON = Auto-shut down activated.
EM Stop
If an emergency shut off button (either remote or on the panel) is pressed, the LED will illuminate
AMBER and the gas will be turned off.
The EM Stop button must be reset before restarting the system.
OFF = OK
ON = Emergency Shut-Off button activated.
Gas Detected
Under normal working conditions this LED is off.
If the external Merlin detector connected detects gas this will show RED and the gas valve will turn off.
OFF = OK
ON = Gas detected.
CO
High
2
Under normal working conditions this LED is off.
If the concentration of CO2 in the air is at alarm level (relevant detector required), the LED will show RED
and the Gas valve will turn off.
OFF = OK
ON = the concentration of CO2 is at alarm level.
Rev: 10
02-21
Merlin 1000S
10