Gama Garden GSS2800 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Niszczarka do papieru Gama Garden GSS2800. Gama Garden GSS2800 17 stron. Silent shredder

Acquaer Kft.

H-4900, Fehérgyarmat, Szatmári utca 11.

• Switch off the machine, unplug the power cord and wait until all moving

parts have completely stopped before carry out maintenance and/or

cleaning.

• Be careful when cleaning and carrying out maintenance. NOTE: Wear

safety gloves – risk of personal injury.

• Never modify the safety devices in any way.

• Place the machine on a level, stable surface.

• Do not tilt the machine when the motor is running.

• Do not use the machine on surfaces where ejected material could

cause personal injury.

• Only use the machine in daylight, or in good artificial lighting.

• Always wear ear protection and safety glasses.

• Do not wear loose-fitting clothing, ties, scarves, etc., that can get

caught in moving parts.

General safety instructions for usage

• The infeed funnel must be correctly fitted before use.

• Never put your hands in the infeed or outfeed openings.

• When feeding make sure that no metal, stones, glass, soil, plastic or

other foreign objects get into the machine – this can damage the roller

and motor. Never use the machine for anything other than its intended

purpose.

• Switch off the motor immediately if the machine starts vibrating

abnormally. Identify the cause. Vibration usually indicates a problem.

• Allow the machine to cool before checking, adjusting, or putting it away, etc.

• Do not use the machine if the roller is not correctly fitted.

• Before using the machine, check that it is not damaged and that it is

working properly. Check that all the screwed joints and other joint are

correctly tightened and that the guards and screens are in place before

starting the machine. Rectify any faults before using the machine.

• If the roller knocks against a foreign object, or if the machine starts

vibrating or making an abnormal noise, unplug the power cord and wait

until all moving parts have completely stopped:

–– Check the machine to see if it is damaged. –– Check and tighten

any loose parts.

–– Replace or repair any damaged parts with parts of the same type.