Gama Sonic 119B50044 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oświetlenie zewnętrzne Gama Sonic 119B50044. Gama Sonic 119B50044 4 stron. Plaza solar rlm light with adjustable gooseneck arm
Drukuj stronę
Assembly Instructions
1. Mount the Bracket to the Wall
1.1. Use a drill to make three holes
in the wall where the lamp
will be mounted. (use the wall
mount bracket (Part C) as a
template for drilling locations)
1.2. Place the Anchors (From Part A)
into the holes and place the bracket
(Part C) in line with the holes.
1.3. Secure the bracket (Part C) to the wall by tightening
the provided screws (From Part A) into the anchors.
3. Attach the Swivel Joint
Connect the swivel joint (Part B)
to the goose neck pole (Part D)
by twisting it clockwise.
Note: You may need to loosen the
set screw on the side first.
4. Installing the Solar LED Bulb
Install the new GS Solar LED bulb
(Part G) in the socket by twisting
the bulb clockwise.
NOTE: Make sure to grip the light
bulb by the base only and NOT the glass lens. The
GS Solar LED Bulb is designed to last up to 10 years,
however if it doesn't work, or if you want to use
different color temperature bulb, it can be easily
replaced.
Our bulbs are available on our website. You can purchase them directly at:
https://gamasonic.com/product-category/parts-and-accessories/
Make sure the new bulb you purchase is compatible with this model
(A60 Directional Bulb)
page 3
2. Assemble the Pole
2.1. If desired, the pole can be
assembled with an extension
piece (Part E).
2.2. To assemble, twist the
extension pole (Part E) into
the goose neck (Part D).
5. Turn the Light On
Turn the operation switch to the
Low or High position according
your preferences:
(Low) For softer light and longer
duration.
(High) For brighter light output.
The solar lamp will automatically
operate at dusk. Install the Lens
(Part H) by twisting clockwise.
7. Attach the Lamp Head
Place the washer (From Part
A) over the threaded rod then
thread the solar lamp (Part F)
clockwise into the swivel joint
(Part B).
8. Adjust the Angle of the Lamp
The angle of the light fixture can be adjusted by
rotating swivel adapter.
a. Loosen the wing nut on the side of the swivel
joint and the set screw where the goose neck
pole connects. (Part B)
b. Position the lamp at the
desired angle.
c. Tighten the wing nut to
secure the lamp at the
desired angle.
d. Tighten the set screw to
keep the lamp head from
twisting sideways.
6. Mount the Lamp to the Wall
Insert the pole into the wall
bracket (Part C) and secure
with the two provided set
screws using the hex wrench
(From Part A).