Hikmicro HM-G630-LENS Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Obiektyw kamery Hikmicro HM-G630-LENS. Hikmicro HM-G630-LENS 12 stron. Interchangeable lens
Drukuj stronę
●
Keep all wrappers after unpacking them for future
use. In case of any failure occurred, you need to
return the device to the factory with the original
wrapper. Transportation without the original wrapper
may result in damage on the device and the company
shall not take any responsibilities.
●
Do not drop the product or subject it to physical
shock. Keep the device away from magnetic
interference.
Maintenance
●
If the product does not work properly, please contact
your dealer or the nearest service center. We shall
not assume any responsibility for problems caused by
unauthorized repair or maintenance.
●
A few device components (e.g., electrolytic capacitor)
require regular replacement. The average lifespan
varies, so periodic checking is recommended. Contact
your dealer for details.
●
Wipe the device gently with a clean cloth and a small
quantity of ethanol, if necessary.
Using Environment
●
DO NOT expose the device to extremely hot, cold,
dusty, corrosive, saline-alkali, or damp environments.
Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -20 °C to 50 °C (-4 °F to 122 °F),
and the operating humidity shall be 90% or less.
●
Place the device in a dry and well-ventilated
environment.
●
DO NOT expose the device to high electromagnetic
radiation or dusty environments.
●
DO NOT aim the lens at the sun or any other bright
light.
●
When any laser equipment is in use, make sure that
the device lens is not exposed to the laser beam, or it
may burn out.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing
Subdistrict,Binjiang District, Hangzhou, Zhejiang 310052,
China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might
be subject to export controls in various countries or
regions, including without limitation, the United States,
European Union, United Kingdom and/or other member
countries of the Wassenaar Arrangement. Please consult
your professional legal or compliance expert or local
government authorities for any necessary export license
requirements if you intend to transfer, export, re-export
the thermal series products between different countries.
7