HIKOB INJ PH-AC100A Instrukcja instalacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Gateway HIKOB INJ PH-AC100A. HIKOB INJ PH-AC100A 11 stron.

Installation Guide

INSTALL_GATEWAY-V5

2019/01 Edition

2 General description

The GATEWAY is one of the elements that constitutes the HIKOB wireless sensor radio network.

This system is a set of wireless sensors doing multi-point distributed measures in various

domains. These sensors radio transmit their acquired data to the GATEWAY, possibly via LION

routers, depending on environment constraints for radio transmission. This local radio network

operates in the 2.4GHz ISM bandwidth and implements the standardized IEEE 802.15.4e

protocol. The GATEWAY provides the user with these acquisitions through its embedded

software: NETPULSE, which makes the interface to any TCP/IP network.

HIKOB systems cover data acquisitions such as vehicle detection for controlled traffic or parking

management.

Figure 1 – External view of GATEWAY dimensions: 180x120x37.2 mm

GATEWAY interfaces the 2.4Ghz ISM HIKOB radio network by providing connection with any

TCP/IP network. It receives and treats sensors measurements that are broadcasted through the

multi-hop wireless network formed by HIKOB sensors and LION routers. These measurements

are available, either displayed on a web page, or via APIs exposed by an embedded REST

server. Information exposed by the GATEWAY can therefore be integrated in a 3rd party

information system. GATEWAY provides services as well to configure HIKOB sensors, and to

perform basic maintenance such as firmware update.

The GATEWAY is not energy-autonomous: it is powered by the PoE technology (Power over

Ethernet) through an Ethernet cable.

Models A and B of the GATEWAY can be installed and used outdoor. The GATEWAY casing is

water resistant with an IP65 protection. The first number 6 identifies protection against complete

180 mm

Page 6