HIKOB Wise Cow Dokumentacja użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Dokumentacja użytkownika dla Akcesoria HIKOB Wise Cow. HIKOB Wise Cow 13 stron.

HIKOB WISE COW

Version 1.1-2466

6 Half-ﬁll the hole with the provided HIKOB resin, and

note on your installation document the serial number of

the HIKOB WISE COW that goes on this hole.

7 Place the sensor in the hole, the side with the HIKOB

logo up. Place it so that the top surface of the sensor is

about 5mm below the top surface of the road. Don't go

below 10mm from the road surface, because it will dras-

tically alter radio transmission performances. Fill the rest

of the cavity with resin, up to the road surface level.

8 It takes about 15 minutes for the resin to dry, depend-

ing on environment temperatures.

November 2015 Page 13/ 14