Dynojet Power Vision Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Elektronika samochodowa Dynojet Power Vision. Dynojet Power Vision 6 stron. For 2019-2022 can-am ryker 600/900
Również dla Dynojet Power Vision: Skrócona instrukcja obsługi (17 strony), Instrukcja instalacji (8 strony), Instrukcja instalacji (7 strony), Podręcznik (7 strony), Instrukcja instalacji (7 strony), Instrukcja instalacji (7 strony), Instrukcja instalacji (7 strony)

Dynojet Power Vision Instrukcja instalacji

GETTING STARTED

Use the Tune File Wizard to prepare your Power Vision
device with the stock (stk) and tune (djt) fi les needed to
fl ash your vehicle.
1
Connect the Power Vision to the vehicle.
2
Turn the key on. The Power Vision will scan for fi les.
There are three possible fi le states:
File State 1: No compatible stock fi les.
File State 2: No compatible tune fi les.
File State 3: All required fi les found.
3
Gauges are displayed.
Connect the Power Vision to the
vehicle diagnostic port to collect
ECU information. Turn the key on.
FLASHING YOUR VEHICLE
The Power Vision must be paired to the connected vehicle ECU
to function properly.
Note: Once paired to the vehicle ECU, the Power Vision will
not work on another vehicle without purchasing a tune
license.
1
From the Main Menu, select Flash Tune.
2
Select the tune fi le and press Enter to view the Tune Info.
3
Press Enter to accept the tune and pair the Power Vision to the
vehicle.
Note: Pair to vehicle will only happen on the fi rst fl ash.
4
Press Enter to pair and lock the Power Vision to the ECU and to
begin the fl ash. Do not turn off the key switch or disconnect the
Power Vision during the fl ash.
5
After the fl ash is complete, turn the key off and wait 45 seconds
before turning the key back on to start.
VIEWING THE VEHICLE INFORMATION
This menu allows you to view the device status (paired/not
paired), VIN #, Model ID, ECU serial number, tune compat, and
checksum compat.
Select Vehicle Tools>Vehicle Information.
File State 1:
Go to www.dynojet.com/pvtunes to
download stock and tune fi les.
File State 2:
Go to www.dynojet.com/pvtunes to
download tune fi les.
File State3:
All required fi les found. The Power
Vision is ready to fl ash a tune to the
connected vehicle.
2507001.djt
2507002.djt
2507001.stk
FLASH TUNE
TUNE INFO
FILE: 2507001.djt
TUNER:
COMPATS: 7B2164PC8VLS1
DESCRIPTION: 2017 Ski-Doo Ace 900 Turbo
7B2164PC8VLS1
Stock intake
Stock exhaust
PRESS
TO START ECU FLASH
VEHICLE INFO
PAIRED VEHICLE: DEVICE NOT PAIRED
VIN: 3JBV6AWZ4HK000560
MODEL ID: 666939
TUNE COMPAT: 7B2164PC8VLS1
CSUM COMPAT:
INSTALLATION GUIDE