Gama Sonic IMPERIAL BULB Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oświetlenie zewnętrzne Gama Sonic IMPERIAL BULB. Gama Sonic IMPERIAL BULB 4 stron. Solar lamp

Drukuj stronę

Assembly Instructions

Fig. 3

page 3

Operation Switch

Fig. 1

. Detach the upper part of the

lamp as shown in (Fig. 1) by

turning it counterclockwise.

. Install the solar LED bulb

(Fig. 5). Turn ON the operation

switch (see Fig. 2.) by choosing

your desired brightness level:

LOW - last longer using dimmer

light.

HIGH- Brighter light output.

. Reassemble the upper part of

the lamp by placing it on top of

the 4 hinges, and then turn it

clockwise.

. Install the lamp onto your

existing 3" post, using the

screws provided (Fig. 3.).

. Screw in the Acorn or Eagle Finial

on top of the lamp (Fig. 4).

The Solar LED Bulb is designed to last up

to 10 years, however if it is not working,

or if you want to use a diﬀerent color

temperature bulb, you can replace it with

a new GAMA SONIC Solar LED Bulb.

Fig. 2

Fig. 4

Replacing the

Solar LED Bulb

. Detach the upper part of the

lamp as shown in Fig. 1 by

turning it counterclockwise.

. Make sure the operation

switch is in the OFF ("O")

position.

. Remove the existing bulb by

turning it counterclockwise

Fig 5.

. Install the new GS Solar LED

Bulb by turning into the

bulb socket clockwise.

. Reassemble the unit

by reversing the above

procedure

Fig. 5

NOTE: When installing the GS

Solar LED Bulb, hold it from its

silver base not by the glass .