Dea 602AN Instrukcje obsługi i ostrzeżenia - Strona 17

Przeglądaj online lub pobierz pdf Instrukcje obsługi i ostrzeżenia dla Otwieracz do bram Dea 602AN. Dea 602AN 20 stron. Hydraulic operator for swing gates

Dea 602AN Instrukcje obsługi i ostrzeżenia
This guide has been prepared for the fi nal users of the automatism; the installer is required to deliver this guide and
illustrate its contents to the person in charge of the system. The latter must then provide similar instruction to all the other
users. These instructions must be carefully conserved and easily available for consultation when required.
Good preventive maintenance and frequent inspection ensures the long working life of the product. Contact the installer
regularly for routine maintenance and in event of anomaly.
1. Always keep a safe distance from the automatism during operation and never touch any moving part.
2. Prevent children from playing near the automatism.
3. Perform the control and inspection operations prescribed in the maintenance schedule and immediately stop using the
automatism whenever signs of malfunction are noted.
4. Never disassemble parts of the product! All maintenance and repair operations must be performed only by qualifi ed
personnel.
5. The release operation must sometimes be performed in emergencies! All users must be instructed on the use of the
release mechanism and the location of the release keys.
WARNING Disconnect the power supply from the control panel before releasing the operator. In case you cannot turn the power
off, you will necessarily have to re-lock the motor in the position in which it was unlocked.
All OLI models are equipped with a release device which must be operated as follows:
Open the lock and lift the protective cover; turn the handle below clockwise to release the motor. At this point, OLI is
released, and the gate can move freely unless there are other impediments. Carry out this procedure in reverse order to
restore OLI's operating conditions.
WARNING: Remember to protect the lock with the respective cover so that the operator is protected by water or powder
(even when it remains unlocked for a long time).
WARNING: During this operation gate may present uncontrolled movement: operate with extra care so to avoid any risk.
The only operation that the user can and must do is to remove branches, leaves, and any other object that might obstruct
the gate's free movement. Warning! Always disconnect the power supply whenever performing operations on the gate!
INSTRUCTIONS FOR THE FINAL USER
SAFETY RULES
OLI RELEASE MECHANISM
CLEANING AND INSPECTIONS
DE A S Y S T E M S .p .A . - Via D e lla Te cn ic a, 6 - I TA LY
360 13 P IO V E NE RO C CH ET T E (V I)
t e l. + 3 9 0 4 4 5 5 5 0 7 8 9 - f a x +3 9 044 5 55 02 65
I n t e rn e t h tt p : \ \ w w w. d e a s y s t em .co m - e- ma il: d ea syst em @de as yste m. co m