Corbin Russwin ASSA ABLOY Access M806 Instrukcja programowania - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja programowania dla Przez blokady Corbin Russwin ASSA ABLOY Access M806. Corbin Russwin ASSA ABLOY Access M806 16 stron.

Drukuj stronę
Access 800
Series
™
Locks
Keypad Programming Instructions
M801, M803, M804, M806 Programming
5
To Enable/Disable A User
99# Master Code or Supervisor Code*
56# 0# (Enable) or 1# (Disable)
(User No. 03-2000)#
*
*
*
To Delete A User
99# Master Code or Supervisor Code*
50# 0# (User Number 03-2000)#
*
*
*
To Clear the Entire Memory
99# Master Code*
46# 00000# 00000#
*
*
*
Status Indicators
•
No Green LED after code is entered once and 3 rapid beeps, but flashes after 3 consecutive entries
– Invalid Code
•
4 Long beeps after Standard code is entered - Low Battery
•
4 Long beeps after Standard code is entered, 4 more long beeps - Voltage (batteries) too low to
operate. Enter Master Code or Emergency Code to gain entry.
•
1 beep after User Code entered – Disabled User
•
4 beeps after User Code entered – Deadbolt Thrown (Mortise Lock Only)
•
3 beeps after User Code entered – User Lockout
•
Alternating Red/Green LED – Awaiting second entry of Code and Card, Tag, or Fob User
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2018-2019 Corbin Russwin, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks quickly
Yellow LED blinks slowly
Yellow LED goes out
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks quickly
Yellow LED blinks slowly
Yellow LED goes out
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks quickly
Yellow LED blinks rapidly, slowly when complete
Yellow LED goes out
13
(617417440) FM359 7/19