Dea REV24/M Instrukcje obsługi i ostrzeżenia - Strona 18

Przeglądaj online lub pobierz pdf Instrukcje obsługi i ostrzeżenia dla Otwieracz do bram Dea REV24/M. Dea REV24/M 19 stron.

This guide has been prepared for the final users of the automatism; the installer is required to deliver this gui-

de and illustrate its contents to the person in charge of the system. The latter must then provide similar instruc-

tion to all the other users. These instructions must be carefully conserved and easily available for consultation

when required.

Good preventive maintenance and frequent inspection ensures the long working life of the product. Contact

the installer regularly for routine maintenance and in event of anomaly.

1. Always keep a safe distance from the automatism during operation and never touch any moving part.

2. Prevent children from playing near the automatism.

3. Perform the control and inspection operations prescribed in the maintenance schedule and immediately stop

using the automatism whenever signs of malfunction are noted.

4. Never disassemble parts of the product! All maintenance and repair operations must be performed only by

qualified personnel.

5. The release operation must sometimes be performed in emergencies! All users must be instructed on the use

of the release mechanism and the location of the release keys.

All REV models have an unlocking system; the working of this system is the following: after unlocking the lock

on the handle (protected by a plastic cover) turn the lever in the direction shown in figure; the operator is now un-

locked and, if no obstructions hinder its movement, the gate can now move freely. The opposite procedure, that

is the rotation of the lever up to the limit switch and the locking of the lock (remember to protect the lock with the

appropriate cover) returns REV to its normal working conditions.

WARNING: During this operation gate may present uncontrolled movement: operate with extra care so to

avoid any risk.

The only operation that the user can and must do is to remove branches, leaves, and any other object that

might obstruct the gate's free movement. Warning! Always disconnect the power supply whenever performing

operations on the gate!

INSTRUCTIONS FOR THE FINAL USER

SAFETY RULES

REV RELEASE MECHANISM

CLEANING AND INSPECTIONS

D EA SYS TEM S.p .A. - Via Della Tecnic a, 6 - ITALY

3 6 0 13 P IO VENE ROCCHET T E (VI)

t el. + 3 9 04 4 5 5 5 07 89 - f a x + 3 9 0 4 45 5 50 26 5

I nt e r ne t h t t p : \ \ w w w. de a s y s t em. c om - e - ma il : d ea s y s te m@d e as y s t em .c o m