Dea TEO 700 Instrukcje obsługi i ostrzeżenia - Strona 6
Przeglądaj online lub pobierz pdf Instrukcje obsługi i ostrzeżenia dla Otwieracz do bram Dea TEO 700. Dea TEO 700 16 stron. Sectional door electromechanical operator
Również dla Dea TEO 700: Instrukcje obsługi i ostrzeżenia (20 strony)
Drukuj stronę
6 PROGRAMMING
1 Power Supply
Turn on the power supply, the courtesy light flashes for a few seconds and the display shows numbers "
symbol "- -".
2 Motor stroke learning
1. Press on the
key until the display shows
P1;
2. Confirm by pressing the
3. When "
" is shown, press the keys
so the door opens ("
Confirm the opening position by pressing the
key;
4. When "
", appears, press the keys
so the door closes ("
Confirm the closing position by pressing the
key;
5. The door automatically opens and closes loo-
king for the opening/closing positions;
6. The display will show "- -", programming com-
plete.
3 Deletion of memorized transmitters
1. Press and hold the
you see "
" on the display;
All remotes previously memorized will be deleted;
Warning: After 20 memorized codes (upper limit), the display shows
"
".
4 Transmitters learning
1. Press and hold the
2. Press the remote key you want to learn, then release it and press
a second time (the display shows "
3. The display will show "- -", learning complete;
4. Repeat this procedure to learn other remotes up to a maximum
of 20 codes;
Warning: After 20 memorized codes (upper limit), the display shows
"
".
12
key;
/
" flashes);
/
" flashes);
key (display shows "
") for 8 sec. until
key until the display shows "
";
" flashing);
" to " " followed by the standby