aireRyder FN56306 Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wentylator aireRyder FN56306. aireRyder FN56306 8 stron.

Drukuj stronę

Plastic Insert

Blade Holder

Motor Screw

Secure blade holders to the motor with

motor screws and washers.

NOTE: Before installing blade

holders to the motor, please

remove the plastic inserts.

Fig.16

Turn ON the electric power at the

main fuse or circuit breaker box.

Fig.17

MED

U/L

For FN56305

Fig.18

Screw

Open the inner light plate of worse bulbs

by screw driver.Take off the worse bulb

and install the new one.

Fig.13

Connect the two terminals respectively

from the motor and the switch box.

Fig.17

DIMMER

Install the battery to the transmitter (9V, not included).

* Press "HI" to turn on the fan at high speed.

* Press "MED" button to turn the fan in medium speed.

* Press "LOW" button to turn the fan in low speed.

LOW

* Press "OFF" button to turn off the fan.

D/L

* Press "U/L" button to turn on/off the upper light, and press and

OFF

hold the "U/L" button to adjust the illumination of light.

* Press "D/L" button to turn on/off the fan light, and press and

hold the "D/L" button to adjust the illumination of light.

Fig.19

Secure the inner light plate back

Fig.14

Switch Box

MED

LOW

OFF

For FN56306

Screw

PAGE: 3 / 4

Assembly without fan light

Make sure the lead wire of fan light

in switch box is sealed with a wire

nut exactly. Secure the switch box

cover with the switch box screws.

Install the battery to the transmitter (9V, not

included).

* Press "HI" to turn on the fan at high speed.

* Press "MED" button to turn the fan in

medium speed.

* Press "LOW" button to turn the fan in low speed.

* Press "OFF" button to turn off the fan.

* Press "LIGHT" button to turn on/off the fan

light, and press and hold the "LIGHT" button

to adjust the illumination of light.

Replace the fan housing inner

bulbs(FN56305)

070421

Fig.15

Switch Box

Screw