Gamber Johnson 7160-0194-02 Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Stacja dokująca Gamber Johnson 7160-0194-02. Gamber Johnson 7160-0194-02 6 stron. Gd8000 docking station
Drukuj stronę
3. Push the latch handle in until the latch
catches and holds the handle. You should
hear an audible click when the latch
engages. (See Figure 5.)
The push button latch can be locked for
added security.
Undocking and removing a computer (Without LAN Usage)
from the vehicle dock
1. Make sure the latch button is unlocked. (Unlock with key if locked).
2. Push in and hold the latch button.
3. With the latch button pushed in, pull out on the latch handle.
4. Lift the back of the computer up and lift it out of the Vehicle Dock.
Undocking and removing an Operating computer (With LAN
Usage) from the vehicle dock (It is important to do an orderly
shutdown when using a LAN computer)
1. Click on the Undock Compter tab listed
on the start menu. (See Figure 6.)
2. Wait until the Undock Complete window
pops up on the computer screen. Once the
window pops up it is safe to remove the
computer from the dock. (See Figure 7.)
3. On 7160-0194-05 & 7160-0194-06 units
turn the power switch (on the front of the
dock) to the off position.
4. Make sure the latch button is unlocked.
(Unlock with key if locked).
5. Push in and hold the latch button.
6. With the latch button pushed in, pull out
on the latch handle.
7. Lift the back of the computer up and lift
it out of the Vehicle Dock.
Figure 5
Align notch
with hook
Figure 6
Figure 7
Page 5 of 6