aireRyder Zephyr Instrukcje instalacji i użytkowania - Strona 4

Przeglądaj online lub pobierz pdf Instrukcje instalacji i użytkowania dla Wentylator aireRyder Zephyr. aireRyder Zephyr 4 stron.

Drukuj stronę

OPERATING THE FAN

The fan can be operated at different speeds by pulling the three-speed switch using the pull cord:

First pull: HIGH speed

Second pull: MEDIUM speed

Third pull: LOW speed

Fourth pull: OFF

FAN ROTATING DIRECTION SWITCH

The switch on the fan controls the direction of rotation. This changes the direction of air movement:

In cold weather: Push the switch "up" so that the fan will circulate the warm air trapped near the

ceiling to move downwards throughout the room.

In hot weather: Push switch "down" so that the fan will create a breeze and circulate the air to

the room.

CLEANING

Risk of injury: Before cleaning the fan, always switch off the power at the main circuit breaker and

wait until the fan has come to a complete stop.

Clean the fan with a dry or damp soft cloth. Do not use any liquids or detergents.

DISPOSAL

Disposal of the fan: You are required to dispose of electric and electronic appliances separately from

your household waste. Please inquire at your municipality regarding proper ways of disposal.

By separately disposing of your electric and electronic appliances, you are participating in recycling and

you are helping to prevent potentially toxic substances from polluting the environment.

Disposal of the packaging: The packaging consists of cardboard and marked plastic and Styrofoam

which can be recycled. Please recycle.

MALFUNCTIONS – TROUBLE SHOOTING

Risk of injury: Inappropriate repairs can lead to the fan not functioning safely. This can cause a

hazard for yourself and your environment.

Please check the following table before contacting your retailer:

Malfunction

Fan does not turn.

Fan vibrates.

If you cannot resolve the malfunction yourself, please ask your retailer directly.

Please note that the warranty will be voided by inappropriate repairs.

TECHNICAL DATA

Speed

III

MANUFACTURER

Vaxcel International Co., Ltd.

121 E North Avenue, Carol Stream, IL, USA

www.vaxcel.com

Underlying cause (error)

Fan switched off?

No mains voltage?

Wiring connected incorrectly?

Fan not installed properly?

Voltage

230V ~ / 50Hz

Solution

Switch on fan.

Check circuit breaker.

Check steps 4 and 5 to ensure

wiring connected correctly.

Install fan thoroughly according

to installation instructions.

Power

60W

53W

RPM

285

230

130