Gamber Johnson TrimLine 7300-0600-03 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria samochodowe Gamber Johnson TrimLine 7300-0600-03. Gamber Johnson TrimLine 7300-0600-03 8 stron. Vehicle dock for getac x600 laptop computers

Drukuj stronę

Docking the Laptop

Step 1:

Ensure that the dock is unlocked and unlatched. If

locked, insert key and rotate lock 90 degrees

counter-clockwise. If latched, push the front release

latch such that the back hooks move all the way out.

An audible noise will be heard once fully un-latched

Step 2:

Lose the side knob, and rotate the screen support to

the back, so that it will not block the laptop while

docking.

Lead the front of the laptop into the front hooks on

the dock such that the pockets on the laptop line up

with the front hooks. The guide tabs should help

align the laptop as well. Take care while positioning

the laptop to ensure proper alignment and to prevent

damage

Step 3:

Push on the back center of the laptop so that rear

hooks latch*. A click sound should be heard when

the rear hooks latch.

The laptop can be docked into the dock with lid

open or close. If the lid is open, make sure that no

keys are pressed while docking

*Do not force docking if resistance is felt.

Stop and check alignment before

proceeding

Step 4:

Gently position the screen to a desired location.

Rotate and slightly pull the screen support arm, so

that the tab rests against the side of the laptop

screen. Adjust screen support tension with the

adjustment knob as needed.

Step 5:

For additional security and theft deterrence, insert

and rotate key 90 degrees clockwise and remove the

key to lock the laptop in the docking station. The

laptop is only fully secure once the key is removed.