JADO Borma 014 160 Series Instrukcje instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Produkt hydrauliczny JADO Borma 014 160 Series. JADO Borma 014 160 Series 2 stron. Wall mounted accessories: towel ring, towel bar, spare tissue holder, shelf
Drukuj stronę
TOOLS REQUIRED
Phillips Screwdriver
Drill
Regular Screwdriver
ROUGHING-IN
DIMENSIONS
Spare Tissue Holder
3 / 8 " D .
5 - 1 / 2 "
1 8 "
1 8 "
2 5 - 5 / 8 "
2 9 - 1 / 2 "
10'
Tape
Level
Measure
Towel Ring
1 "
5 / 8 " D .
5 - 1 / 2 " D .
Shelf
4 - 3 / 4 "
Towel Bar
014/460 (18")
014/600 (24")
014/800 (30")
2-1/2"
1
INSTALL WALL BRACKET
The wall mounted accessories work best if secured to a wall stud or cross brace within the wall, using the SCREWS (1) supplied.
If the wall mounted accessories are to be installed on a tile or plaster wall the ANCHORS (3) and SCREWS (1) should be used.
Determine desired height and location (optional) and mark a center line. Using the MOUNTING POST (2) as a template mark the
spot for the ANCHOR (3). If MOUNTING POST (2) is secured to a stud or cross brace drill small pilot hole for SCREW (1).
For installations on drywall or tiled walls: Use ANCHOR (3) and SCREW (1) for securing MOUNTING POST (2) to finished wall.
Drill a 1/4" dia. hole a minimum of 1-3/4" deep. Insert the ANCHOR (3) flush with face of the finished wall.
Secure MOUNTING POST (2) to wall with SCREWS (1).
2 - 1 / 2 "
2
INSTALL ACCESSORY ( Spare Tissue Holder and Towel Ring)
Install ESCUTCHEON (4) onto WALL MOUNTED ACCESSORY.
Install WALL MOUNTED ACCESSORY with ESCUTCHEON (4) onto installed MOUNTING POST (2). Push WALL MOUNTED ACCESSORY
flush against MOUNTING POST (2) and tighten SET SCREW (5) with HEX WRENCH (6) suppied to secure to wall.
Push ESCUTCHEON (4) against finished wall.
2
1 0 9 6 5 2 A
3
2
FINISHED WALL
1
USE MOUNTING POST
AS TEMPLATE
OPTIONAL TO
FINISHED FLOOR
OPTIONAL TO
FINISHED FLOOR
3
2
1
4
Towel Ring
5
6
1
4
Spare Tissue Holder
5
6
3
OPTIONAL TO
FINISHED FLOOR
USE MOUNTING POST
AS TEMPLATE
1 0 9 6 5 2 A