Airespace 1300 Instrukcja szybkiej instalacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Bezprzewodowy punkt dostępowy Airespace 1300. Airespace 1300 13 stron. Outdoor wireless routing access point
Drukuj stronęPlanning Notes
Planning Notes
•
About Cables
•
About External Antennas
•
About Mounting Options
•
Planning Notes
•
FCC Statements for Airespace APs
•
Safety Considerations
About Cables
About Cables
•
You will run one CAT-5 Ethernet cable from the Airespace 1300 to the Airespace WLAN
Controller, another network device, or a PoE injector/hub.
•
When you are powering the Airespace 1300 from AC power, route the power supply cable from
the AC electrical outlet to the Airespace 1300. Make sure you secure the AC power plug so it will
be difficult for people to pull on the power cord or unplug the power supply from the AC power
outlet.
•
When you are powering the Airespace 1300 from a PoE source (Airespace WLAN Controller,
another network device, or a PoE injector/hub), you do not need to route a separate power
cable to the Airespace 1300, because the Airespace AP will receive its power across the CAT-5
Ethernet cable.
About External Antennas
•
Refer to the Airespace AP External and Internal Antennas section in the Airespace Product
Guide for an overview of the external 802.11a and 802.11b/g external antennas usable with
the Airespace 1300s.
•
When you are attaching external antennas to the AS-1300-EXT Airespace 1300, use cables with
N-type connectors to connect antennas to the ports on the end of the Airespace 1300. Refer to
the following figure for antenna port markings.
Figure -
Airespace AP External Antenna Port Markings
3/24/05
90-100xxx-001
About External Antennas
TBD
Planning Notes
9