AGT INDUSTRIAL AGT-ECSSLR72 Instrukcja obsługi produktu - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Sprzęt rolniczy AGT INDUSTRIAL AGT-ECSSLR72. AGT INDUSTRIAL AGT-ECSSLR72 10 stron. Skid steer landscape rake attachment 72"

Drukuj stronę

OPERATION INSTRUCTIONS

Warning!

• Never lift the product above the operator's eye level or to a height where visibility is

obstructed, whichever is lower.

•Do not roll back the product so far that the load falls off toward or on the

operator.

•Do not lock the auxiliary hydraulics of your prime mover in the "ON" position.

•Keep everyone at least nine feet away from this product when operating.

Installation

1.Place this product on a firm, level surface that is large enough to safely accommodate this product,

your prime mover and all workers involved in the mounting process.

2.Refer to the operator's manual(s) for your prime mover, loader, and quick-attach and follow the

mounting instructions contained therein.

3.Carefully raise the loader and cycle the rollback/dump cylinders to check clearances and to verify

that all mounting procedures have been successfully completed.

Hydraulic Connection

1.Disconnect the hydraulic hose quick couplers from one another and attach the quick couplers to

your prime mover as per the instructions in your prime mover's operator's manual.

2.Carefully raise the loader and cycle the rollback/dump cylinders to check hose clearances and to

check for any interference. Operate the hydraulic cylinder(s) on this product to make the same checks.

3.Cycle the hydraulic cylinder(s) on this product several times from fully retracted to fully extended

until all air has been completely removed from the cylinder(s).

Do not lock the auxiliary hydraulics of your prime mover in the "ON" position.

Failure to obey this warning could result in death or serious injury.

[email protected]

Warning!

https://www.agrotkindustrial.com/