DYS DWA-2000A-SS Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler DYS DWA-2000A-SS. DYS DWA-2000A-SS 17 stron. On-line suspended solids controller

DWA-2000A-SS

7. Guide to Functions of Keys

: Entry into Calibration Mode and Change of settings

: Entry into Set Mode, Change of data digits, and/or Manual cleaning

: Change of pre-established data

: Confirmation of input after correcting data

1) CA0 : ZERO calibration

2) CAS : SPAN calibration

3) C-1 : Correction of temperature

4) C-2 : Setting of manual temperature compensation (MTC) (in case there is no temperature sensor)

5) C-3 : Input of compensation per temperature 1

6) S-1 : Input of ZERO compensation

7) S-2 : Input of coefficient compensation

8) S-3 : Setting of damping

9) r-H : Setting of contact point at HIGH density

10) r-L : Setting of contact point at LOW density

11) 0-1 : Setting of LOW reference value for analog output

12) 0-2 : Setting of HIGH reference value for analog output

13) CL1 : Setting of cleaning period (unit: 1 minute)

14) CL2 : Setting of cleaning duration/ time (unit: 1 second)

15) CL3 : Setting of delay time after cleaning (unit: 1 second)

Daeyoon Scale Industry Co.,LTD.

Suspended Solids Controller

- 6 -