Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T Podręcznik - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik dla Zmotoryzowany samochód zabawka Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T. Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T 18 stron. Pack 8
Również dla Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T: Podręcznik (18 strony), Podręcznik (18 strony), Podręcznik (18 strony), Podręcznik (18 strony)
Drukuj stronę
1B
1.3
M
ount
the throttle plates 1E onto the linchpins on the plate
shaft 1P. The arrows on the plates must all point in the same
direction.
1E
1.4
E
asE
the plate shaft onto the air intake, using the side grooves on
the latter. The arrows must point towards the front of the air intake.
1D
AM
USEFUL TIP
When handling the body parts, it is a good idea to take a few small precau-
tions to protect the paintwork from scratches. We recommend you prepare
a clean work area and that you work on a cloth or sheet of cardboard, so
as to protect the pieces against damage.
1.1
nine type AM screws.
1.2
1A
1P
1E
1P
2
s
tart
by placing the bonnet 1A on your work surface,
with the inner side facing upwards. Put bonnet 1A and
reinforcement panel 1B together. Join the two pieces with
P
ut
the Butterfly valve plate shaft baseplate 1Q
and the air intake 1D together. Join the pieces with
two type BP screws.
BP
1Q
1.5
P
ut
the lower half of the air intake 1M and the
injector plate 1G together, ensuring that the pieces
are facing the same way as shown in the illustration.
Join the two pieces with four type AP screws.
AP
STAGE 1
1D
AP
1M
1G