GAME SolarPRO 4721 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Podgrzewacz basenowy GAME SolarPRO 4721. GAME SolarPRO 4721 13 stron. Curve heater
Również dla GAME SolarPRO 4721: Instrukcja obsługi (12 strony)

Drukuj stronę

Solar Heater Location

Your solar heater needs to be located on a hard level surface. You will need to position the heater lower than the pool's water level and

at a safe distance away from the pool (see Section 1, Safety Warnings).

•

The unit(s) should never be placed on the roof of any structure, or more than 60" above the water level of the pool.

•

The unit(s) may be angled toward the sun using the legs provided. Do not exceed the angle the legs

produces, or 30 degrees from horizontal in any direction.

NOTE: The solar heater is to be installed between the filter and the pool water inlet, AFTER the water is filtered. The heater

must come after the filter to prevent buildup in the tubing.

IMPORTANT: If you are using a chlorine generator OR an in line chlorinator, it must be connected in-line following the solar

heater to prevent damage to the heater.

CAUTION: BEFORE LOOSENING ANY THREADED CONNECTIONS ON YOUR FILTER, PUMP OR POOL, BE SURE THE SUCTION

AND PRESSURE HOSES ON THE FILTER ARE CLOSED OR BLOCKED TO PREVENT WATER FLOW.

IMPORTANT: To reduce heat loss, use a pool cover on your pool overnight.

PARTS LIST/REFERENCE

Main Unit (1)

Hose Clamp (2)

Adapter with O-Ring for INTEX® Pools (2)

Only used with 2¼" diameter

threaded hoses

Owner's Manual

Flat Gasket (2)

1¼"-1 ½" Hose Reducer (2)

Hose Adapter with O-Ring (2)

Adapter with O-Ring for BESTWAY® Pools (2)

~ OR ~

Note: Some parts may be pre-installed at the factory. Parts not shown to scale.

Collar (2)

Filter Hose (2)

Only used with 2¼" diameter

threaded hoses

SAVE THESE INSTRUCTIONS