HIKOKI C 6MEY Instrukcja obsługi Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi Instrukcja obsługi dla Piła HIKOKI C 6MEY. HIKOKI C 6MEY 16 stron.
Drukuj stronę
C6MEY: Circular Saw
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
V
Rated voltage
n
No-load speed
0
Switching ON
Switching OFF
Disconnect mains plug from electrical outlet
Mode selector switch
Lighting switch
Prohibited action
Class II tool
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 7.
Standard accessories are subject to change without notice.
APPLICATIONS
Cutting various types of wood.
SPECIFICATIONS
Model
Voltage (by areas)*
Power Input
No-Load Speed
Cutting
Capacity
depth
Weight
*
Be sure to check the nameplate on product as it is
subject to change by areas.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
C6MEY
(230 V, 240 V)
1050 W
4100 /min (Power mode)
2500 /min (Silent mode)
90°
66 mm
45°
45 mm
2.8 kg
Electronic control
○ Soft-start
○ Overload protection
This protection feature cuts off the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate causes
of overloading.
After that you can use it again.
○ Overheat protection
This protection feature cuts off the power to the motor
and stops the power tool in the event of overheating of
motor during operation.
When the overheat protection feature has been
activated, the motor may stop.
In this case, release the tool switch and cool it down in a
few minutes.
After that you can use it again.
○ Rotation speed changeover function (Power mode /
Silent mode)
(Power mode / Silent mode switch function)
Each press of the Mode Selector Switch changes the
operating mode. (Fig. 15)
Silent mode reduces maximum motor RPM enabling
effi cient work with less noise.
The Silent Mode Indicator Lamp lights in Silent mode.
When the load increases during Silent mode, the tool will
automatically switch to Power mode and revert back to
Silent mode when the load decreases.
In Power mode, no change is made to Silent mode even
when the load decreases.
NOTE
○ To enable mode changes, pull the switch once after
connecting the main plug.
○ Do not give a strong shock to the switch panel or break it.
It may lead to a trouble.
MOUNTING AND OPERATION
Action
Fine tuning of parallelism
Fine tuning of perpendicularity
Fine tuning of guide piece position
Adjusting the cutting depth
Cutting line
Switch operation
About the mode select function (*1)
Using the LED light
Using the cord holder
Attaching the long guide (sold separately)
Attaching the guide (sold separately)
Attaching the fl uorine plate
(sold separately)
Attaching the dust collection adapter
(sold separately)
Cutting at right angles
Inclined cutting (+45° direction)
Inclined cutting (–5° direction)
Dismounting the saw blade
Mounting the saw blade
Selecting accessories
5
Figure
Page
9
9
10
9
11
9
12
10
13
10
14
10
15
10
16
10
17
10
18
11
19
11
20
11
21
11
22
11
23
12
24
12
25
13
26
13
―
15