Maisi M30 Skrócona instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kamery samochodowe Maisi M30. Maisi M30 17 stron.

Date Stamp Setting
ADAS Detect
Loop Setting
Speed setting
Time Zone
AE Bias
Speed
Warning
Setting
LED Setting
G-Sensor Setting
Motion Detection
Menu Options
Language Setting
Record Mode Setting
System Mode
Driver ID Setting
Time Setup
Format
[On/Off]
When it is ON, product model/plate number/date/time (preset) will be
shown at the right bottom corner of the screen and will appear on the
recording files.
[On / Off]
GPS dongle required for this function.
[1min/3min/5min]
The device will generate a file every 1min/3min/5min. Once the
capacity is full, the oldest file will be overwritten. A 32GB SD card can
record continuously for around 3 hours at the best resolution 1296P
before the capacity is full.
[KM/H, M/H]
GPS dongle required for this function
[-12~+12]
Set the time zone for different country. "+0" for London.
[-2.0EV~+2.0EV]
Adjust the EV value to make the footage or snapshot brighter or
dimmer.
[Off/80KMH/120KMH]
If the driving speed exceed the preset value, the camcorder will give
out alarm to warn the deriver. GPS dongle required for this function.
[On/Off]
If set to Off, the LED light on the buttons will turn black. This setting is
not for the front LED light.
[Off/Low/Medium/High]
This refers to the sensitivity. Under G-Sensor mode, when an impact
is detected the footage will be saved anyways.
[On/Off]
Under Motion Detection mode, the camcorder records automatically
when it senses movement. Please disable it when driving.
System settings
Available options
[English/Russian/Simplified Chinese/Traditional Chinese]
Select the system language.
[Auto Record/Manual Record]
When set to Auto Record, the camcorder will automatically start
recording when the car starts up; when set to Manual Record, you
will need to press the power button to turn on the camcorder.
[NTSC/PAL]
Please set to NTSC when you are in UK.
Set up the plate number for the car
Set up the date and time display for the recording
To format your SD card
All data will be erased.
Page 9 of 16