Adexa 6G-TRH60 Instrukcja instalacji i obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla grill Adexa 6G-TRH60. Adexa 6G-TRH60 20 stron. Gas lava rock grill

Installation

NOTE:

•

It is most important that this appliance is installed correctly and that operation is correct before

use. Installation shall comply with local gas, health and safety requirements.

•

This appliance shall be installed with sufficient ventilation to prevent the occurrence of

unacceptable concentrations of substances harmful to health.

Our Gas LAVA ROCK GRILLs are designed to provide years of satisfactory service and correct installation is

essential to achieve the best performance, efficiency and trouble-free operation.

This appliance must be installed in accordance with National installation codes and in addition, in accordance

with relevant National / Local codes covering gas and fire safety.

Installations must be carried out by qualified persons only. Failure to install equipment to the

relevant codes and manufacturer's specifications shown in this section will void the warranty.

Components having adjustments protected by the manufacturer are only to be adjusted by an

authorized service agent. They are not to be adjusted by the installation person.

• Remove all packaging and transit protection from the appliance including all protective plastic coating

from the exterior stainless steel panels.

• Check equipment and parts for damage. Report any damage immediately to the carrier and distributor.

• Ensure that the 4 adjustable feet are fitted with the protruding centre screw.

• Report any deficiencies to the distributor who supplied the appliance.

• Check that the available gas supply is correct to that shown on the rating plate located on the right hand

panel.

Installation must allow for a sufficient flow of fresh air for the combustion air supply.

Installation must include adequate ventilation means, to prevent dangerous build-up of combustion

products.

Any gas burning appliance requires adequate clearance and ventilation for optimum and trouble-free

operation. The minimum installation clearances shown below are to be adhered to.

Position the appliance in its approximate working position.

All air for burner combustion is supplied from underneath the unit. The legs must always be fitted

and no obstructions placed on the underside or around the base of the unit, as obstructions will

cause incorrect operation and / or failure of the appliance.

Components having adjustments protected by manufacturer are only allowed to be adjusted by an

authorized service agent. They are not to be adjusted by the installation person.