Gree XK41 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler Gree XK41. Gree XK41 19 stron. Command center for ductfree split systems
Również dla Gree XK41: Techniczna instrukcja obsługi produktu (11 strony), Instrukcja obsługi (2 strony)

Drukuj stronę

1. Lcd Display of Wired Controller
2. Functions of Buttons
3. Mode Setting
4. Temperature Setting
5. Operation Instructions
6. Connection of the Signal Line of the Wired Controller
7. Other Functions
8. Errors Display

3.6 Swing Setting

Swing On: Press Function under on state of the unit to activate the swing function. In this case,

will blink. After that, press Enter/Cancel to make a confirmation.

Swing Off: When the Swing function is on, press Function to enter the Swing setting

interface,with

blinking. After that, press Enter/Cancel to cancel this function. Swing setting is

shown as Fig.3.6.1.

Notes:

S leep, Turbo or Blow setting is the same as the Swing setting.

① .

A fter the setting has been done, it has to press the key "Enter/Cancel" to back to the setting

② .

status or quit automatically five seconds later.

Fig.3.6.1 Swing Setting

Wired Controller XK41 & XK47