Gree XK47 Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler Gree XK47. Gree XK47 19 stron. Wired controller

Fig.4.2 shows the installation steps of the wired controller, but there are some issues that need

your attention.

1) Prior to the installation, please firstly cut off the power supply of the wire buried in the

installation hole, that is, no operation is allowed with electricity during the whole installation.

2) Pull out the four-core twisted pair line from the installation holes and then let it go through

the rectangular hole behind the soleplate of the wired controller.

3) Stick the soleplate of the wired controller to the wall over the installation hole and then fix it

with screws M4X25.

4) Insert the four-core twisted pair line into the slot of the wired controller and then buckle the

front panel and the soleplate of the wired controller together.

5) Finally, fix the front panel and the soleplate of the wired controller tightly by screws ST2.9X6.

CAUTION!

Please pay special attention to the followings during the connection to avoid the malfunction of

the air conditioning unit due to electromagnetic interference.

S eparate the signal and communication lines of the wired controller from the power cord

① .

Fig.4.2

Wired Controller XK41 & XK47