Gree EVO Series Instrukcja instalacji urządzenia - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja instalacji urządzenia dla Chiller Gree EVO Series. Gree EVO Series 18 stron. Mini chiller

Unit Installation

4.12 Wiring of the Remote Air Temperature Sensor

Electric box

Notes:

Distance between the monobloc unit and the remote air temperature senor should be less than 15

①

meters due to length of the connection cable of remote air temperature sensor;

Height from floor is approximately 1.5 meters;

②

Remote air temperature sensor can not be located where the area may be hidden when door is open;

③

Remote air temperature sensor can not be located where external thermal influence may be applied;

④

Remote air temperature sensor should be installed where space heating is mainly applied;

⑤

After the remote air temperature sensor is installed, it should be set to "With" through the wired

⑥

controller so as to set the remote air temperature to the control point.

Installation of the thermostat is very similar to that of the remote air temperature sensor.

Front side

Remote Air Temperature Sensor

Back side

YES

1.5 Meters

Remote Air Environment

Temp sensor

15K

CN1

Doors