GameSir T3S Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler GameSir T3S. GameSir T3S 14 stron. Wireless game controller

ENGLISH

HOW TO CONNECT TO SWITCH OR SWITCH LITE VIA

BLUETOOTH

1. Long press the Y + Home key for 2s until the gamepad is turned on. The

indicator blinks red quickly to show the pairing mode entered;

2. Go to the HOME menu of the Switch or Switch Lite, and click: Controllers

——Change Grip/Order to enter the pairing interface.

3. The indicator is solid red to show a succesful connection;

4. The next time you connect it to Switch or Switch Lite, just by pressing the

Home key for 2s to power on, the gamepad will automatically wake up the console.

TURBO COMBO FUNCTION

1. Combo setup: Press and hold the key that needs a combo setup, then press

the Turbo key (programmable keys: A / B / X / Y / L1 / L2 / R1 / R2);

2. Combo gear: 3 gears, Slow/Middle/Fast;

3. Adjustment of combo gear: press and hold the TURBO key, then press the

D-Pad's left key (downshift) or right (upshift) to adjust the combo gear. The

indicator light will flicker 1 time when it's at Slow level, 2 times at Middle, and

3 times at Fast;

4. Combo cancel: Long press the CLEAR key for 2s to cancel all the combo keys

that have been set.

Press and hold the key that needs a combo cancel, then press

the CLEAR key to cancel the combo function of the single key.

MOTOR VIBRATION INTENSITY ADJUSTMENT

1. Vibration gear: 4 gears, Off/Low/Middle/Strong;

2. Adjustment of vibration gear: press and hold the TURBO key, then press the

D-Pad's down key (downshift) or up (upshift) to adjust the vibration gear.

JOYSTICKS & BUMPERS CALIBRATION

When the joysticks cannot be centered or pushed to the edges, and the

bumpers cannot be reached to "0" or the maximum value, you can use the

following method to calibrate the joysticks and bumpers:

1. Press L2+R2+L3+R3 in sequence for 3s. The indicator starts to flash

alternately in blue and purple.

2. Rotate the two joysticks at their maximum angles, each for 3 times;

press L2 + R2 to their maximum travel.

3. Long press L1+R1 for 2s to confirm the joysticks & bumpers calibration.

RESET

When the gamepad doesn't work, you can use a pin to press the RESET hole

for a force shutdown.

FIRMWARE UPDATE

You can check whether there is firmware update of the

gamepad in GameSir App.

Scan the right QR code to download the GameSir mobile

application.

ENGLISH